The kit includes:
(2) rail grips (2"x6" each)
(1) set 1/2 mid panels (8"x6" each)
(1) set mid panels (8"x12" each)
(1) set back panels (7"x12" each)
(2) 2"x12" panels
Wax Mats have an excellent wet grip and is non-abrasive to the skin. May be used on the decks of surf, skimboards, marine crafts, bathtubs and any where an excellent slip resistant, non-abrasive, see-through surface is needed.
Installation on Board with Wax
Note: Proper installation of the mats takes about the same amount of time as it takes to rub on a good coat of wax. Best not to be in a hurry.
Note: Use the end of a ruler, putty knife, wax scraper, or roller, and firmly press the mat onto the board as the liner is peeled off the adhesive. This prevents bubbles from forming under the panel.
Care and Maintenance
The Wax Mats can be cleaned with dishwashing detergent and scrub brush. Rinse with fresh water. Avoid applying or using solvents such as paint thinner, acetone, or xzylene, on the Wax Mats.
These wax mats are great and easy to apply. You will never need wax again and they also help with protecting the board against pressure dents. I use these on all my boards. Lastly, Surfco is a great local company who always follows up on letting you know when the have shipped and always a Mahalo for your purchase.
Great product. I started using wax mats because I wanted something to protect the surface of my board and help prevent those pressure pockets you get over time. This stuff works great for that and of course no more wax. The product is easy to apply, does not yellow or fade and does not peel off.
Lastly the company is a local one with great people who care about their customers and their products.