The kit includes:
(5) 2"x6" rail grips
(1) set nose panels (8"x12" each)
(1) set 1/4 mid panels (8"x3" each)
(1) set 1/2 mid panels (8"x12" each)
(5) set mid panels (8"x12" each)
(4) 2"x12" panels
(3) 3'x12" panels
(1) set back panels (7"x12" each)
(1) set tail panels (4"x12" each)
(1) 2"x6" panel
Wax Mats have an excellent wet grip and is non-abrasive to the skin. May be used on the decks of surf, skimboards, marine crafts, bathtubs and any where an excellent slip resistant, non-abrasive, see-through surface is needed.
Installation on Board with Wax
Note: Proper installation of the mats takes about the same amount of time as it takes to rub on a good coat of wax. Best not to be in a hurry.
Note: Use the end of a ruler, putty knife, wax scraper, or roller, and firmly press the mat onto the board as the liner is peeled off the adhesive. This prevents bubbles from forming under the panel.
Care and Maintenance
The Wax Mats can be cleaned with dishwashing detergent and scrub brush. Rinse with fresh water. Avoid applying or using solvents such as paint thinner, acetone, or xzylene, on the Wax Mats.